Buy AFL FlexScan FS200

AFL FlexScan FS200 Single-Mode OTDR

The AFL FlexScan FS200 is a pocket sized all in one single mode OTDR for detecting, identifying, locating, and resolving optical network issues. It is designed to be simple enough for novice technicians while delivering the performance experienced installers expect. SmartAuto data acquisition event analysis and LinkMap results make it quick to troubleshoot or fully characterize fiber links including live PON networks.

Key Features AFL FlexScan FS200

• FleXpress fast test mode: completes dual wavelength tests in as little as 5 seconds which AFL says is about 10 times faster than conventional OTDR tests (available on selected models)
• High dynamic range: up to 37 dB on higher end models, with a 25 m PON dead zone on PON capable versions
• PON testing: test up to 1:64 splits with live PON OTDR testing at 1625 or 1650 nm using a filtered detector
• Flexible wavelengths: single, dual, or triple wavelength versions, in 1310/1550, 1310/1550/1625, 1310/1550/1650, and 1650 nm only options
• Excellent resolution: pulse widths from 3 ns to 20 µs range settings from 250 m to 240 km and data spacing as fine as 5 cm
• Three OTDR modes: SmartAuto, Expert, and Real time (up to 4 Hz refresh)
• LinkMap results: easy to read link display with pass/fail indications summarizing events across the link
• Live fiber protection and detection: no OTDR damage with input of up to +15 dBm and it reports live fiber before testing
• Launch quality check: verifies the OTDR launch condition before starting a test
• Single port: for in service and out of-service OTDR tests
• All-in-one tool: integrated visual fault locator (red 650 nm laser, Class II) with optional light source and power meter for insertion loss and power measurements
• Jobs creation: define and save OTDR and power meter test sequences transfer them between FlexScans and run automated tests with one button
• Integrated MPO switch control: over USB for high density fiber testing
• Data handling: Telcordia SR-4731-compatible .SOR trace files 4 GB internal memory (over 5,000 traces typical) USB memory stick support, and USB Bluetooth or Wi-Fi (option) transfer to a PC
• Rugged, lightweight handheld design: available with a field replaceable connector

Typical Applications

• FTTH and PON installation and troubleshooting
• Enterprise, data center, and campus fiber certification
• Telecom and outside plant fiber maintenance
• Live PON network testing
• Fault location and fiber characterization

Why Choose It

The AFL FlexScan FS200 packs fast testing strong dynamic range and a simple LinkMap interface into an affordable handheld. The integrated VFL optional source and meter and automated test jobs mean one tool can handle most single mode testing jobs with fewer setup errors.