Tektronix MSO72304DX Mixed Signal Oscilloscope, 23 GHz
The Tektronix MSO72304DX is a high performance mixed signal oscilloscope from the MSO/DPO70000DX series with 23 GHz of analog bandwidth on all four channels plus 16 logic channels. It is built for engineers who validate and debug the fastest digital designs such as high speed serial buses memory interfaces and wideband RF systems where a lower bandwidth scope would distort the signal. Tektronix designed the series so that signal integrity checks and timing analysis can be done without the scope own noise and jitter getting in the way.
Key Features Tektronix MSO72304DX
- 23 GHz bandwidth on all 4 channels at once: single shot bandwidth is maintained on every analog channel so signals are captured without undersampling
- Fast rise time: about 17 ps (10% to 90%) and 13 ps (20% to 80%) according to a rental listing
- Very high sample rate: 100 GS/s on 2 channels and 50 GS/s on all four analog channels simultaneously giving fine timing resolution
- 16 logic channels: the MSO version adds digital channels for system level debugging alongside the analog signals with a 12.5 GS/s logic sampling rate
- Deep memory: standard record length of 62.5 MS (analog and digital) with options of up to 500 MS on four channels and 1 GS on two channels (the 23, 25, and 33 GHz models)
- Fast waveform capture: more than 300,000 waveforms per second maximum per channel with MultiView Zoom for navigating long records
- Low noise and jitter: a typical jitter noise floor under 380 fs with bandwidth enhancement enabled per a distributor FAQ
- Hardware bandwidth settings: selectable limits from 33 GHz down to 4 GHz, in steps
- Serial standards support: application packages for high speed serial standards compliance plus wideband RF analysis (SignalVu vector signal analysis) DDR memory bus analysis and power supply measurements
- Jitter and eye diagram analysis: the DPOJET tool is available (and listed as standard on some units)
- Connectivity: an integrated 10/100 Ethernet port and a video out port for a monitor or projector
- Typical optional software on used units: PCI Express compliance (PCE) Ethernet compliance (ET3) protocol trigger and decode (PTD) jitter and eye analysis (DJA) and advanced power measurement (PWR)
Typical Applications
- High speed serial bus validation and compliance testing (PCI Express, Ethernet, and others)
- DDR memory bus analysis
- Signal integrity, jitter, and eye diagram analysis
- Wideband RF and radar signal analysis
- Research and development of high speed digital and mixed signal designs
Why Choose It
The Tektronix MSO72304DX gives you real time 23 GHz performance on every channel with very low noise so measurements reflect the signal and not the scope. The mix of fast sampling deep memory and application software supports everything from debugging a new design to formal compliance checks.






