NoiseKen ESS-S3011 ESD Simulator GT-30R Discharge Gun
The Noiseken ESS-S3011 GT-30R discharge gun is a 30 kV electrostatic discharge (ESD) simulator for testing how electronic equipment withstands static discharge. It reproduces the ESD event from a charged human body so manufacturers can check whether products malfunction or degrade when touched. It complies with IEC/EN 61000-4-2 Ed.2 and with ISO 10605 Ed.2 when the optional gun head and CR units are added. In NoiseKen range it is the smart, higher function model, and it replaced the older Noiseken ESS-S3011 GT-30R
Key Features Noiseken ESS-S3011 GT-30R
- Output voltage: 0.2 to 30.0 kV (±5%) positive or negative polarity with a 30.5 kV maximum
- Contact and air discharge modes: with a discharge detection function in air discharge mode
- IEC standard test mode: contact discharge steps of 2, 4, 6, and 8 kV, and air discharge steps of 2, 4, 8, and 15 kV
- Manual and sequence modes: set voltage, repetition interval, and number of discharges yourself (1 to 60,000, or continuous) or use sequence mode for sweeping discharges
- Repetition cycle: 0.05 to 99.9 seconds or manual
- Standard network: a CR unit of 150 pF and 330 ohm built into the GT-30R discharge gun
- Three pre-checking functions: high voltage output, withstanding voltage, and discharge relay operation checked when the gun is inserted in the supplied holder (these are pre checks not a calibration)
- CR constant indicator: recognizes the gun head and CR unit fitted with an indicator to prevent a wrong combination
- One-touch exchange of gun head and CR unit: for quick changes between test setups
- Three trigger modes: gun trigger, main unit trigger, or external trigger
- Radiation level modes: normal or extra with a built in switching function
- Color LCD with a ten-key and rotary knob: for easy settings
- Remote and automated testing: a D-SUB 15-pin connector supports a patrol light automatic ESD eliminator, external interlock, and external trigger
- Lighter discharge gun design: the simulator and gun are separate which keeps the gun light and reduces replacement part costs
- Gun holder included as standard
Typical Applications
- ESD immunity testing of electronic equipment to IEC 61000-4-2
- Automotive component testing to ISO 10605 (with optional parts)
- Product compliance and pre compliance testing
- Design validation and failure analysis in R&D labs
- Automated or programmed ESD test setups
Why Choose It
The Noiseken ESS-S3011 GT-30R combines a wide voltage range built in pre checks and flexible test modes in one programmable unit. A light, separate discharge gun and one touch parts changes make testing less tiring and help avoid setup mistakes.
